1x6 WP4 V-Groove Tongue & Groove · Standard — face of three boards with V-groove profile badge
1x6 WP4 V-groove tongue and groove spec sheet: 5-1/2 in width, 5-1/8 in exposure, 23/32 in thick
Single 1x6 WP4 V-groove tongue and groove pine board lying flat
Face of three 1x6 WP4 V-groove boards
Close-up of the 1x6 WP4 tongue and groove joint and V-groove, end grain
End view of three 1x6 WP4 boards showing the tongue and groove profile
Flat back side of three 1x6 WP4 boards

1×6 WP4 V-Groove Tongue & Groove · Standard

Price range: $7.12 through $14.24 per board

Standard grade Eastern White Pine, 1×6 WP4 V-groove tongue & groove. Planed both sides. Sold by the board in 8’–16′ lengths.

Call the yardHow many boards? Use the calculator ↓
  • We check in to confirm. After you order, we check lengths and count with you before anything moves.
  • Pickup or delivery. Delivery is charged at checkout by zone; we confirm the date when we call.
  • See it first. Showroom visits by appointment: 603-735-6500.
Category:

Description

How many boards?

Enter the area you’re covering. We add waste and round up to whole boards for each length. Estimate only. Measure width × height of each wall or ceiling and subtract large openings. We confirm the count with you before your order goes through.


–boards
Enter your wall or ceiling area.

Board length

    Eastern white pine WP4 tongue & groove with a V-groove on one face and a flat back. It works inside or out: feature walls, ceilings or exterior siding. Kiln dried and kept dry in the yard’s warehouse, and easy to work with.

    Nominal size 1×6
    Actual width 5-1/2″ (23/32″ thick)
    Profile WP4 tongue & groove · V-groove one side, flat back
    Species Eastern white pine
    Grade Standard (NELMA)
    Surface Planed both sides
    Exposure installed 5-1/8″ (3/8″ overlap)
    Coverage per board
    8′ · 3.42 sq ft10′ · 4.27 sq ft12′ · 5.13 sq ft14′ · 5.98 sq ft16′ · 6.83 sq ft
    Lengths 8′, 10′, 12′, 14′, 16′
    Sold By the board
    Dry status Kiln dried

    Coverage = 5-1/8″ exposure × board length.

    End view of the 1x6 WP4 board: 5-1/2 inch actual width, 5-1/8 inch exposure, 23/32 inch thick, V-groove face and flat back
    Drawing for reference only.

    Good to know

    Is the price per board or per foot?

    Per board. The price depends on the length you pick, from $7.12 for an 8′ board to $14.24 for a 16′. Every length works out to about $0.89 per linear foot.

    How much does one board cover?

    Each board shows 5-1/8″ once installed, so a 10′ board covers 4.27 sq ft. Use the calculator above to turn your square footage into a board count.

    Can I mix lengths?

    Yes. Add one length to your cart, then pick another length and add that too. Each length is its own line.

    How is this different from the 1×6 WP4 nickel gap?

    Same 1×6 WP4 board and grade. This one has a flat back. The nickel gap version has a V-groove on one side and a nickel gap profile on the other, so you can choose either look.

    Pickup or delivery?

    Either. After you order, we check in to confirm lengths and count and to set up pickup at the yard or a delivery time. Delivery is charged at checkout by zone; we confirm the date when we call.

    Can I see the boards first?

    Yes. Call the yard at 603-735-6500 to set up a showroom visit. Visits are by appointment.

    More from the yard